Mining Weather Station

1.Introduction to Mining Weather Station

Mining Weather Station is a powerful, compact explosion-proof air quality weather station designed to operate normally in the harsh environment of mining areas.FB01S Mining Weather Station is an integrated meteorological station developed and produced by our company based on market demand for special places such as chemical plants and oil depots.It integrates data collection, storage, display and communication, and connects with the backend computer management software or central control room PLC and DCS through wired communication to perform data processing and analysis.

This Mining Weather Station adopts the design concept of high protection grades such as corrosion protection, explosion protection, waterproof, shockproof, and dustproof, which can meet the needs of chemical plants, oil depots, tunnels, mines and other scenarios.

2.Features of Mining Weather Station

1.The hidden ultrasonic probe on the roof cover can avoid interference from rain and snow accumulation, and avoid natural wind shading☆

2.The principle is to transmit a continuous frequency conversion ultrasonic signal, and to detect the wind speed and direction by measuring the relative phase☆

3.Five elements integrated sensors with wind speed, wind direction, air temperature, humidity and atmospheric pressure☆

4.RS232/RS485 connection to PLC/DCS transmission

5.4G collector upload cloud service, with 3 years of traffic

3.Technical parameters of Mining Weather Station

1.Wind speed: measurement principle ultrasonic wave, 0~60m/s (±0.1m/s+0.01V) resolution 0.01m/s;

2.Wind direction: measurement principle ultrasonic wave, 0~360° (±2°); resolution: 1°;

3.Air temperature: measurement principle diode junction voltage method, -40-80℃ (±0.3℃ (25℃)), resolution 0.01℃;

4.Air humidity: measurement principle capacitive type, 0-100%RH (±3%RH (20%~80%)), resolution: 0.01%RH;

5.Atmospheric pressure: measurement principle piezoresistive type, 300-1100Hpa (±0.25%), resolution 0.1hpa;

6.Screen: 4.3-inch LCD screen, high-definition color screen;

7.Standalone version data storage: no less than 500,000 pieces; cloud service data storage: piece/minute, storage time 1 year/cycle;

8.Power consumption: 2.0W

9.Manufacturers have ISO quality management system, environmental management system and occupational health management system certification

10.The manufacturer has a computer software registration certificate

11.The manufacturer has Ex ia IIC T6 Ga high-grade explosion-proof certificate

12.The manufacturer is a 3A credit enterprise

13.Equipment through GB3836.1-2010 explosive environment Part 1: General requirements for equipment

14.Equipment through GB3836.4-2010 explosive environment Part 4: Protected by intrinsically safe "i'' equipment

4.Functional features of Mining Weather Station

1.Integrated structural design, easy installation and disassembly;

2.Sensor shell ASA material, corrosion-resistant and oxidation-resistant;

3.Support customization and can flexibly configure monitoring elements according to user needs;

4.Two display methods: PC and LCD screen, wired transmission

5.Five-defense design: waterproof, explosion-proof, dustproof, shockproof, and corrosion-proof;

6.Standard modbus-RTU protocol supports the docking of multiple background protocols to provide convenience to customers;

7.Low-power design, AC220V power supply;

5.Introduction to Mining Weather Station’s upper computer software

1.Software for receiving, storing, viewing and analyzing PC stand-alone version of data

2.Support serial port RS232 and RS485 data reception, processing and display

3.Support json strings, modbus-RTU and other communication methods

4.You can set the storage time yourself.You can set the upper computer acquisition time in modbus-RTU acquisition mode.

5.Support self-service addition, deletion, and modification of monitoring parameters protocols, names, icons, etc.

6.Support data post-processing function

7.Support external running of javascript scripts

6.Installation of Mining Weather Station Equipment

1.Confirm the on-site working conditions and set the installation plan by our company

2.Simple installation, no professional operation required, remote guidance can be installed

3.The user does not need to distribute parts by themselves.The company will carefully configure the equipment and install and use it as soon as possible when you arrive.